推拉叉车附件

/ 所有附件 / 推拉叉车附件

推拉叉车附件
A push-pull forklift attachment is a material handling device designed to move long and heavy loads with ease. It is attached to the forklift and helps in pushing and pulling large and heavy loads, making the movement of goods from one place to another much easier. This attachment is especially useful for handling long and narrow loads such as pipes, steel beams, and sheets.

The push-pull attachment is made up of two arms that are attached to the forklift's tines. These arms can be extended to accommodate the length of the load being transported. The arms also have rollers on their ends that make it easier to move the load. The rollers can be adjusted to the desired height, making it possible to transport loads of different heights and sizes.

This attachment is easy to install and operate. It can be easily attached to the forklift and removed when not in use. The arms can be extended or retracted to accommodate the size of the load being transported. The attachment also comes with hydraulic control valves that make it possible to control the speed and direction of the load.

The push-pull forklift attachment is ideal for handling long and narrow loads such as pipes, steel beams, and sheets. It reduces the risk of damage to the load and the environment, as it allows for precise control over the movement of the load. The attachment also helps to increase productivity by reducing the amount of time and effort required to transport the load.

In conclusion, the push-pull forklift attachment is a useful tool for transporting long and heavy loads. It makes material handling easier, reduces the risk of damage to the load and the environment, and increases productivity. This attachment is a must-have for any company that handles long and narrow loads.

产品优势


HUMAI forklift push/ pull forklift attachment with China Xinchai C490 engine, hydraulic transmission,USA EATON hydraulic assisted steering valve,SHIMADZU oil pump,full suspension chassis.It is widely used to handing all kinds of goods,such as pallet,steel,brick etc.Shantui has cooperated with KOMATSU more than 30 years,all the product was made under KOMATSU standard.

影片


发动机
模型
华美C490
额定输出
40/2650
千瓦/转
额定扭矩
165/1800
N·米/转
气缸数量
4
缸径×冲程
90×105
毫米
移位
2.7
大号
外形尺寸
提升高度
3000
毫米
LxWxH(带/不带叉)
3779(2709)x1226x2140
毫米
转弯半径
2450
毫米
桅杆倾角(F / R)
6/12
学位
性能
行驶速度(满载/空载)
19/20
KM / H
提升速度(有/无)负载
420/450
毫米/秒
Max.gradeability
20
%
自重
4560
公斤
车轮和轮胎
面前
28×9-15-14PR
6.50-10-10PR
轴距
1700
毫米
最小距离(桅杆)
110
毫米

快速详情


条件:新的
产地:中国厦门(大陆)
品牌名称:华迈
型号:HUAMAI30
类型:动力托盘车
Power Souce:柴油发动机
额定载重量:3000kg
最大。提升高度:8000mm
闵。提升高度:3000mm
叉长:1070mm
叉宽:122mm
外形尺寸:3829x1226x2140mm
认证:ISO9001 / ISO14001 / CE
提供售后服务:工程师可在海外维修机械
Accseeory: push/ pull
Fork Size: 1070*122*40mm
Load Center: 500 mm
Tire: Pneumatic
Power type: Diesel
Color: Yellow
Wheel Base: 1700mm
Battery: 12V/60Ah
Oil Tank Capacity: 50Liter
operating pressure: 17.5Mpa